Whether it occurs in the ceiling due to a leaky roofing system, flooding or condensation from the central air conditioning unit, fixing water-damaged drywall may only cause you aggravation and anxiety, most especially if you have not done it yet prior. After all, the walls and ceilings in your residential property are supposed to be sturdy and solid, as well as making a hole into one must be really very difficult. As a matter of fact, it is basically far from it all.

The procedure will take a few preparations and make a little bit of a mess however, with a little care and patience, you can make the damages gone invisible in just some few days drywall. Actually, drywall is a panel of calcium sulfate dihydrate or gypsum which is sandwiched between 2 kinds of paper (the darker backer and the other one is light-colored facer).

Most of the interior drywall is half an inch thick for walls. Similar thickness is being used for ceilings however, 3/4 inch is common where the design requires to be more rigid. For curves and arches, 1/4 inch will be used. A lot of home centers stock little pieces and some will cut pieces in sizes with designated prices.

Identifying Water Damage to Drywall

Since the gypsum drywall is soluble in water and porous, having it moist can become a big headache for you. Drywall that is wet will become heavy to pull off nails and screws which hold the drywall in place. However, in the event where the drywall gets wet and just starts to sag prior to drying out, repairing it may need pushing it back into the spot, securing with some new nails or screws, and then painting over it with a few more stain-killing paint.

But if your drywall gets smushy and soft, then it seems like the paper will separate and the gypsum will crumble when the spot completely dries up. And because of this, you will be required to cut out water-damaged areas as early as possible. When performing an assessment on how to fix ceiling drywall when it is already sagging and wet, it is very possible which it could have water leaking above you or elsewhere. In order to drain the water pooling in a controlled manner, make a hole through it using a nail to drain out water. Put a bucket under the repair in order to catch water.

Wet drywall may absorb water so, it attracts the mold because it serves as a magnet. The moisture or wet environment, as well as mold spores are having feast on the paper. Therefore, whether you are cleaning up a flood or a leak in the attic, you have to fix water-damaged drywall in a given period of time. In addition to that, you also would like to ensure that the damaged spot is carefully dry prior to starting the repair and patch up. Contact drywall repair Salt Lake City if you want to know more information about how to fix your drywall.